Important: All Spring Kits only for cars without self-levelling systems
Important Kit Notes
1 The amount of lowering will be reduced on vehicles fitted with Original Sports Suspension / OEM 2 The lowering of the front axle depends on the vehicle specification and weight of the engine 3 For fine tuning, please refer to the original Daimler Benz spring isolators available in different heights (8-23mm) 4 A TUV presentation is necessary despite ABE for vehicles with a load depending brake power distributor 5 Sedan without self-levelling - Estate / Station Wagon / Combi with Self-levelling 6 Additional lowering may occur on vehicles equipped with automatic transmissions 7 Not for Station Wagons / Combi / Estates 8 Up to 8.79 please use spring seat no. 171412341A 9 excludes 4-wheel drive 10 As of 9.1994 original Volkswagen springs seats might be necessary: 1H0412341 (big) or 357412341 A (small) 11 Not suitable for Serial / Original Sports Suspension (OEM) 12 Front springs only, torsion bars on the rear axle 13 All wheel / tyre combinations are allowed which have been approved by the ABE or other certified Wheel Testing Institutes (Germany Austria Switzerland) 14 If RH drive shaft diameter is bigger than 42 mm and when lowering 40 mm or more the RH driveshaft may foul the anti roll bar. If so you will need to fit a modified anti-roll bar or a longer steering rod from your VW/Audi dealer 15 Excludes self-levelling
